I am looking for someone to do a 4 layer PCB layout from DXF drawings. I have been trying to use KiCad but I am slow and I am running out of time. I have watched the videos and thought this might be a good place to find a design contractor. The board is fairly straight forward but has 1 Rf signal trace running a 2.4 ghz signal. 200 gold pads on the bottom translating to about 100 gold pads on the top metal. A half a dozen or so passive components and one Rfid communication chip. Any help would be apreciated.
1 Like
Hey Pat, I sent you a DM about this from your other post. Feel free to ping me about this.
2 Likes
I have set up a meeting tomorrow at 10:00 on your calendar.